The glass floors are highly in demand but they may lose the original shine and needs refinishing from time to time. If your floor is very dull and in bad condition, this whole process requires you need to be careful. There are some useful steps for cleaning the floor:
Remove Old Finish – Check all surfaces very carefully and if there is a point to lift or nails, holes, nicks or dents, remove them properly. Clean if any sticky substance as this can damage the whole process of sanding and polishing. Outsides must be correctly washed before beginning and getting all the furniture removed as well.
If you are interested in reading more about glass raised access floor (which is also known as ‘พื้นยกแก้ว‘ in the Thai language) then you can check out online websites.
Use Portable Edge Sander – You can rent a floor sanding equipment or get the whole job done by a professional. If you do it yourself, be sure to use a portable sander because it will work better on the boundary as needed. Before you begin, ask the professionals to show how to operate the machine and how to install the sanding belt.
Covering openings – Before beginning the procedure, covering all openings such as electrical switches, outlets, and a heating duct. Use tape and thick plastic to protect all of these things and it is better to drop the sheet on the door itself.